User description

We live in the world where people are concerned about standards, especially when for the products they buy. This is why you will find similar types of products manufactured by different companies having many identical features. In fact, you've probably noticed that most garage opener systems have no difficulty getting the job done. For homeowners, that means installation is quite similar from one brand to another.Certain steps, like preparing the garage door will likely vary from brand to brand. The installation itself is a fairly easy process, though.Here's what you'll need to get startedIn most cases, the homeowner will not need any special or unusual tools to complete an average garage door opener install. Some of the more common tools used for this job include:Carpenter's level
Claw hammer
Drill
Flat/Philips screwdrivers
Hacksaw
Ladder
Pencil
Pliers
Sockets & wrench (1/2-1/4)
Standard tape measureMost people find that the entire install can be completed in 2hrs or less, and will go more smoothly when another person is able to help.Below, you will find some basic instructions on how to install one. More precise instructions can be found in the manual or issued verbally by the retailer.Step 1 0">1 : Put in place the carriage tube This is what that carriage will move on while carrying out the opening and closing of the garage door. It stretches from the power source to the location of the door. In most cases it is always imported in parts form. Just put the parts together as per the manual shipped with it. Follow all the instructions specified i.e. concerning measurements and you will not go wrong in the installation.Step 2: Fit the carriage With the use of the installation manual, install the carriage. It always runs from the power source to the wall in which the door has been fixed. Check if you are needed to do any other work before proceeding to the next step.Step 3: Incorporate the carriage on the tubeIdentify how to slip the carriage using the manual given. This is usually different depending on the opener's manufacturer.Step 4: Install the bracket that will house the carriageThis is what will hold the carriage. It is usually installed above the door. Just find out the exact location and then make the necessary adjustments. Also ensure you take into consideration the power-unit. Step 5: Position the power unitMost of the power-units are always made to hang from the ceiling. Just ensure that you fix it in a way that will make sure it is firm. Find out how you are supposed to integrate it with the metal straps. Of importance is to ensure that it is in a safer distance from the opener. This ensures that there is no situation they come into contact with each other.Step 6: Fixing the armEnsure that the brackets are in the correct position and are attached to the door. This ensures that the arm is able to correctly lift the door.Step 7: Confirm that the safety measures are operationalGarage door openers have a sensor that is able to detect the there is something in the door way and thus restrain the closing of the door. This ensures that at no instance does the door close while your car is not fully out or inside.With these steps you will be guaranteed of a successful installation. Just make sure that you abide by the manufactures instructions and all will be well.